SA213 T11 Alloy Steel Boiler Membrane Wall Panel with φ42×5mm Cr-Mo Tube for 550°C Service Temperature
Λεπτομέρειες προϊόντος
| Εξωτερική διάμετρος σωλήνα: | φ42mm | Δάχος τοιχώματος σωλήνα: | 5mm |
|---|---|---|---|
| Υλικό σωλήνα: | SA213 T11 (1,25Cr-0,5Mo) | Υλικό μπάρας μεμβράνης: | 15CrMo |
| Σωλήνας: | 65-85 χλστ | Πλάτος πίνακα: | Προσαρμόσιμο |
| μήκος πάνελ: | Έως 12000mm | Μέθοδος συγκόλλησης: | Συγκόλληση υποβρύχιου τόξου + χειροκίνητη TIG |
| Μέγιστη θερμοκρασία σέρβις: | 550°C | Εφαρμογή: | Περίβλημα Υπερθερμαντήρα, Λέβητας σταθμού παραγωγής ηλεκτρικής ενέργειας |
| Επισημαίνω |
SA213 T11 Alloy Steel Panel,φ42×5mm Cr-Mo Membrane Wall,Superheater Enclosure Tube Wall |
||
Περιγραφή του προϊόντος
The SA213 T11 Alloy Steel Boiler Membrane Wall Panel is engineered with φ42×5mm chromium-molybdenum alloy tubes for high-temperature superheater enclosure walls. The 1.25Cr-0.5Mo composition provides exceptional oxidation and creep resistance at temperatures up to 550°C, making it ideal for the most demanding boiler zones.
Manufactured from SA213 T11 seamless alloy steel tubes containing 1.25% Chromium and 0.5% Molybdenum. This ferritic alloy offers superior high-temperature strength and resistance to graphitization and oxidation compared to carbon steel. Membrane bars are fabricated from 15CrMo alloy steel for material compatibility. Tube-to-fin welding uses submerged arc welding (SAW) for deep penetration, supplemented by manual TIG welding at panel edges and corner joints.
- High-Temperature Performance: 1.25Cr-0.5Mo alloy maintains mechanical properties up to 550°C, suitable for superheater and reheater enclosure zones
- Oxidation Resistance: Chromium content forms a protective oxide layer, reducing tube wall thinning in high-temperature flue gas environments
- Creep Strength: Molybdenum addition significantly improves creep rupture strength under sustained thermal loading
- Precision Welding: Combined SAW + TIG welding process ensures full-penetration bonds with minimal heat-affected zone degradation
- Post-Weld Heat Treatment: Stress-relieved after fabrication to eliminate residual welding stresses per ASME PWHT requirements
Material certificates to EN 10204 3.1 standard. 100% volumetric NDE including ultrasonic testing of all tube butt welds. Hydrostatic testing at 1.5x design pressure. Positive material identification (PMI) verification on all alloy components.
| Parameter | Specification |
|---|---|
| Tube OD | φ42mm |
| Tube Wall Thickness | 5mm |
| Tube Material | SA213 T11 (1.25Cr-0.5Mo) |
| Membrane Bar Material | 15CrMo |
| Tube Pitch | 65-85mm |
| Welding Method | SAW + Manual TIG |
| Max Service Temperature | 550°C |
Designed for superheater and reheater enclosure wall sections in subcritical and supercritical pulverized coal-fired power plants. Also suitable for fluidized bed boiler furnace zones requiring enhanced oxidation resistance.
Τα κυριότερα σημεία του προϊόντος
SA213 T11 Πάνελ τοίχου από κράμα χάλυβα με μεμβράνη SA213 T11 1.25Cr-0.5Mo με σωλήνες φ42×5mm για τοίχους περιβλήματος υπερθερμαντήρων. Ανθεκτικό στην οξείδωση σε υψηλές θερμοκρασίες έως 550°C σε λέβητες σταθμών ηλεκτροπαραγωγής.
Υψηλής πίεσης θερμοσίφωνας θέρμανσης επιφάνειας μεμβράνης τοίχου ζύγιση τόξου αργονίου για θερμοσίφωνα βιομάζας
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
Υψηλής συχνότητας συγκόλληση H Fin σωλήνα οικονομιστή για λέβητα σταθμού παραγωγής ηλεκτρικής ενέργειας ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Ατσάλι άνθρακα SA192 Superheater Coil Argon Arc Welding 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Κεταλλικός λέβητας SA210A1 Χάλυβας Κεταλλικός οικονομιστής ανταλλαγής θερμότητας Μέρος Πιστοποίηση ASME
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Παρακαλούμε χρησιμοποιήστε την ηλεκτρονική φόρμα επικοινωνίας παρακάτω αν έχετε οποιεσδήποτε ερωτήσεις, η ομάδα μας θα επικοινωνήσει μαζί σας το συντομότερο δυνατό.
