logo
προϊόντα
λεπτομέρειες για τα προϊόντα
Σπίτι > προϊόντα >
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production

Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production

Τροποποιημένο: 10
τιμή: $2,200-2,500
Λεπτομέρειες
Τόπος καταγωγής
Ζανγκτζαγκάνγκ, Κίνα
Μάρκα
HD Boiler
Πιστοποίηση
ISO9001,ASME,SGS,EN,TUV
Αριθμό μοντέλου
Εξοικονομητής τύπου γυμνού
Τύπος:
Φυσική κυκλοφορία
Δομή:
Σωλήνες φωτιάς και σωλήνες νερού
Πίεση:
Χαμηλός/υψηλή πίεση
Παραγωγή ατμού:
Μέγιστο 60 τόνους/ώρα
Στυλ:
Κατακόρυφος
Καύσιμα:
Άλλες συσκευές
Παραγωγή:
Ζεστό νερό/ατμός
Επιφανειακή επεξεργασία:
Ζωγραφισμένος
OD BARE:
25-1650 mm
Γυμνό πάχος σωλήνα:
2-40 mm
Πάχος πτερυγίων:
00,6-3,0 mm
Ύψος πτερυγίων:
5-30 mm
Βήμα πτερυγίου:
5-30 mm
Μήκος πτερυγίου:
≤12000 mm
Υλικό:
Χαλός ανθρακούχου, κράμα, ωστενιτικό χάλυβα
Επισημαίνω:

Max 60t/h Steam Production Boiler Economizer

,

Low High Pressure Boiler Economizer

,

Finned Tubes Boiler Economizer

Περιγραφή του προϊόντος
Low / High Pressure Flue Gas Boiler Economizer Heat Exchanger Devices With Finned Tubes
Boiler Economizer
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production 0
Introduction
The economizer performs a key function in providing high overall boiler thermal efficiency by recovering low-level energy from flue gas before it's exhausted to the atmosphere. It recovers this energy by heating the boiler feedwater. Economizers are tubular heat transfer surfaces used to preheat boiler feed water before it enters the steam drum or furnace surfaces, reducing operating costs by recovering extra energy from flue gas.
Procedure
Economizers also reduce the potential for thermal shock and strong water temperature fluctuations as feed water enters the drum or waterwalls. Increasingly stringent environmental regulations limiting nitrogen oxides and sulfur dioxide emissions can affect economizer design. The gas-side heat transfer coefficient is much less than the water-side coefficient, so outer tube surfaces may be finned to increase heat transfer surface area. The ultimate goal of economizer design is to achieve necessary heat transfer at minimum cost, with maximum allowable flue gas velocity being a key design criterion.
Specifications
Name (unit) Specification (mm)
Bare pipe (OD) 25-1650
Bare pipe (Thickness) 2-40
Fin (Thickness) 0.6-3.0
Fin (Height) 5-30
Fin tube thread pitch 5-30
Fin tube length ≤12000
Material: Carbon Steel, Alloy, Austenitic Steel (Nickel and Chromium or Manganese)
Quality Control
  • Impact test and Strength calculation report with applied materials information
  • 100% NDT (non-destructive inspection) report of steel plate, tube and electrode
  • X-ray, γ-ray and liquid penetrant test inspection report (welding seam) to ensure quality
  • Hydraulic test report to ensure standard working pressure and safety
Similar Products
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production 1
Company Information
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production 2
Certificate
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production 3
Packaging & Shipping
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production 4
FAQ
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production 5
Contact Us
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production 6
Συνιστώμενα προϊόντα
Boiler Membrane Walls Made of SA210C for Power Plant Boiler Replacement Βίντεο
προϊόντα
λεπτομέρειες για τα προϊόντα
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production
Τροποποιημένο: 10
τιμή: $2,200-2,500
Λεπτομέρειες
Τόπος καταγωγής
Ζανγκτζαγκάνγκ, Κίνα
Μάρκα
HD Boiler
Πιστοποίηση
ISO9001,ASME,SGS,EN,TUV
Αριθμό μοντέλου
Εξοικονομητής τύπου γυμνού
Τύπος:
Φυσική κυκλοφορία
Δομή:
Σωλήνες φωτιάς και σωλήνες νερού
Πίεση:
Χαμηλός/υψηλή πίεση
Παραγωγή ατμού:
Μέγιστο 60 τόνους/ώρα
Στυλ:
Κατακόρυφος
Καύσιμα:
Άλλες συσκευές
Παραγωγή:
Ζεστό νερό/ατμός
Επιφανειακή επεξεργασία:
Ζωγραφισμένος
OD BARE:
25-1650 mm
Γυμνό πάχος σωλήνα:
2-40 mm
Πάχος πτερυγίων:
00,6-3,0 mm
Ύψος πτερυγίων:
5-30 mm
Βήμα πτερυγίου:
5-30 mm
Μήκος πτερυγίου:
≤12000 mm
Υλικό:
Χαλός ανθρακούχου, κράμα, ωστενιτικό χάλυβα
Ποσότητα παραγγελίας min:
10
Τιμή:
$2,200-2,500
Επισημαίνω

Max 60t/h Steam Production Boiler Economizer

,

Low High Pressure Boiler Economizer

,

Finned Tubes Boiler Economizer

Περιγραφή του προϊόντος
Low / High Pressure Flue Gas Boiler Economizer Heat Exchanger Devices With Finned Tubes
Boiler Economizer
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production 0
Introduction
The economizer performs a key function in providing high overall boiler thermal efficiency by recovering low-level energy from flue gas before it's exhausted to the atmosphere. It recovers this energy by heating the boiler feedwater. Economizers are tubular heat transfer surfaces used to preheat boiler feed water before it enters the steam drum or furnace surfaces, reducing operating costs by recovering extra energy from flue gas.
Procedure
Economizers also reduce the potential for thermal shock and strong water temperature fluctuations as feed water enters the drum or waterwalls. Increasingly stringent environmental regulations limiting nitrogen oxides and sulfur dioxide emissions can affect economizer design. The gas-side heat transfer coefficient is much less than the water-side coefficient, so outer tube surfaces may be finned to increase heat transfer surface area. The ultimate goal of economizer design is to achieve necessary heat transfer at minimum cost, with maximum allowable flue gas velocity being a key design criterion.
Specifications
Name (unit) Specification (mm)
Bare pipe (OD) 25-1650
Bare pipe (Thickness) 2-40
Fin (Thickness) 0.6-3.0
Fin (Height) 5-30
Fin tube thread pitch 5-30
Fin tube length ≤12000
Material: Carbon Steel, Alloy, Austenitic Steel (Nickel and Chromium or Manganese)
Quality Control
  • Impact test and Strength calculation report with applied materials information
  • 100% NDT (non-destructive inspection) report of steel plate, tube and electrode
  • X-ray, γ-ray and liquid penetrant test inspection report (welding seam) to ensure quality
  • Hydraulic test report to ensure standard working pressure and safety
Similar Products
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production 1
Company Information
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production 2
Certificate
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production 3
Packaging & Shipping
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production 4
FAQ
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production 5
Contact Us
Low High Pressure Boiler Economizer with Finned Tubes and Max 60t/h Steam Production 6
Sitemap |  Πολιτική απορρήτου | Κίνα Καλό Ποιότητα Superheater σπείρα Προμηθευτής. 2017-2025 Zhangjiagang HuaDong Boiler Co., Ltd. Όλα. Όλα τα δικαιώματα διατηρούνται.